Streetpro09
Tester
The Blue Cheese is bulking up pretty good the last two weeks. Looks like it might go another 2. The rock candy cake is looking good too. The scale will tell the tale. I haven't been doing it long enough to tell.
Pro's not so pro grow.
- Thread starter Streetpro09
- Start date
sfrigon1
Seed Aficionado
Well they both look great let me know what ends up being heavier I'm always interested in that
Streetpro09
Tester
Enjoy my friend, Thank you for the support!Well I got the hook up from @J.James today. My first official breader packs!!!Thanks j.james hopefully I'll do you proud.
View attachment 72245
Streetpro09
Tester
Rock Candy Cake fading a little. 3 or 4 days of straight ro water with no ph adjustment.
Streetpro09
Tester
These are Rock Candy Cake. Ones about a day away from chop. The other is a comparison from day 24 and 31. So a week between them.
Day 24
Day 31
Day 24
Day 31
Streetpro09
Tester
Got the main flower room rearranged this weekend and plants in place tonight.
Streetpro09
Tester
One week worth of stretch.
Streetpro09
Tester
Slight deficiency on two of the Blue Cheese. Didn't run into this last time around. I'm thinking cal deficiency. Can you guys tell with the hps back lighting?
Streetpro09
Tester
Kinda ugly buds but they're getting big. They have about 2 weeks left.
Streetpro09
Tester
The bloom room is pretty full. Might be able to get 2 more plants down the center. We'll see if I feel like moving them every time I need to get in there. Will be chopping a couple of the back plants later tonight.
I agree Cal mag, Check for Thrips just to be safe.
What's your medium? Hydro - Ya that's my guess is Cal mag
Streetpro09
Tester
Current bloom room
Skunk Hero and Diesel Rock Candy
Skunk Hero
Grape Champa
Rock Candy Cake
Skunk Hero and Diesel Rock Candy
Skunk Hero
Grape Champa
Rock Candy Cake
Streetpro09
Tester
Well I thought I would try my hands at promix. I have a buddy that uses it and doesn't do so well so I thought I would give it a shot and see what his problem is.
So these were in the cloner for like 5 weeks. Definitely shouldn't have been left that long but it is what it is. Went transplanting I put some mycos in the hole and then stuffed the roots in there. Mixed up a mild nutrient solution and phed it to 6.5. Used a quart of water for each 3 gallon pot. I had no runoff. Part of the promix is not even wet.
Three days later and they are developing calcium spots. So I raised the lights and put a fan on them.
Four days after transplant the spotting is getting worse. Doesn't really look like they're drinking anything.
So these were in the cloner for like 5 weeks. Definitely shouldn't have been left that long but it is what it is. Went transplanting I put some mycos in the hole and then stuffed the roots in there. Mixed up a mild nutrient solution and phed it to 6.5. Used a quart of water for each 3 gallon pot. I had no runoff. Part of the promix is not even wet.
Three days later and they are developing calcium spots. So I raised the lights and put a fan on them.
Four days after transplant the spotting is getting worse. Doesn't really look like they're drinking anything.
Streetpro09
Tester
I'm thinking that once they dry out a little I'll water again with the same nutes abbreviation get some runoff. Then I'll check ph on that. Hopefully it'll tell me something usable. Any pointers would be appreciated.
Old ST1R
Grow Yer Own Stone
I’d say you’ve got some deficiencies happening, since there is almost no food in the promix.
Go full strength and give each pot another three quarts. That should get you to runoff.
Streetpro09
Tester
OK what would a full strength feed look like ppm wise? I originally fed them with 470ppm. Which is what I feed my dwc plants under the same light with no deficiencies.
MtRainDog
Blümen Meister
Good advice. They need nutes if just in pro-mix. For 3 gal pots, you want closer to 3quarts - 1 gallon of water + feed. Water/feed until runs off. Promix has excellent, if not the best, porosity so it'll be hard to over water.
Old ST1R
Grow Yer Own Stone
I know pretty much jack shit about ppm, but from what I’ve read, 470 seems low. Maybe try upping that to 900 - 1000.