#Heisenbeans Genetics

yougrowyourway

illgrowmyway
I was thinking it might have been a day or two sooner using the clonex rooting gel.
I notice a day or two sooner too nothing really that deep to honestly ever buy it again.
Thanks for the insight Cap'n. Yea was thinking of changing out the solution for straight tap to see how that goes. I got a lotta chlorine in the tap but past veg clones did fine with it.
Tap is where it's at. My tap water retarded high.

Where I live you can get a water report from the city but why does it go from 450 to 750 PPM all over the place. I measure it all the time.
No idea. I just know the tap water sucks. RO is the only way it works right for me. It is a lot to do with the water coming being some of the hardest around. Add chloramine and whatever the hell else is in it and...

Water quality can be a real bitch for some people. I

My filters were almost done on the machine but it would tame it to 100ppm of whatever and that was workable.
I was wondering this too. My pH from tap is usually 7.4 but will jump to 8.5 the lowest I've gotten is 7.3. the ppm however is usually around 750. Gonna get a water test done now.
Ro is a good step but doesnt remove any pathogens.
This I didn't not know. I got you heis its gibberellic acid 😉
 

NoWaistedSpace

PICK YOUR OWN
I notice a day or two sooner too nothing really that deep to honestly ever buy it again.

Tap is where it's at. My tap water retarded high.


I was wondering this too. My pH from tap is usually 7.4 but will jump to 8.5 the lowest I've gotten is 7.3. the ppm however is usually around 750. Gonna get a water test done now.

This I didn't not know. I got you heis its gibberellic acid 😉
Has anyone used "activated charcoal and a layer of DE to filter contaminates out of your tap water? You use this to filter your resin for impurities when distilling cannabis oil. I'm not sure what it will filter out of the water. If someone has the testing equipment, would be nice to know if it will work. It is just a thought.
 

yougrowyourway

illgrowmyway
Has anyone used "activated charcoal and a layer of DE to filter contaminates out of your tap water? You use this to filter your resin for impurities when distilling cannabis oil. I'm not sure what it will filter out of the water. If someone has the testing equipment, would be nice to know if it will work. It is just a thought.
I've been thinking about that but I was waiting to see what my RO system does to the water. I usually leave it out for a day with an airstone in it. I know a bunch of bullshit evaporates over a day or so. My main problem with tap water is the damn pH buffer they add in. That is my main reason for leaving them out for a couple days.
 

Capt C

Saltwater Cowboy
I've been thinking about that but I was waiting to see what my RO system does to the water. I usually leave it out for a day with an airstone in it. I know a bunch of bullshit evaporates over a day or so. My main problem with tap water is the damn pH buffer they add in. That is my main reason for leaving them out for a couple days.
The last place i was in i had pretty bad well water. I hooked up 2 pretty good size sediment filters to the main line coming from the well. From that point i hooked up a RO system next to a mop sink. I was able to get the water pretty close to 0 coming from the RO source. Kinda pricey had to change the sediment filters 3-4 times a year then the RO filters once a year.
 

yougrowyourway

illgrowmyway
The last place i was in i had pretty bad well water. I hooked up 2 pretty good size sediment filters to the main line coming from the well. From that point i hooked up a RO system next to a mop sink. I was able to get the water pretty close to 0 coming from the RO source. Kinda pricey had to change the sediment filters 3-4 times a year then the RO filters once a year.
Once I ditch AN I think I should have the extra funds to do something like that if the RO system doesn't get me close to 0. I'm tired of waiting for my roommate to hook it up so this weekend I'm hoping a few of youse will be available if I need some assistance since I still have to read the instructions lmao
 

thenotsoesoteric

Shinobi of seeds
You just cut them at a 45 degree angle and put them in plain tap water? Warm temp and thats all?

I have no room or id give it a go :D
Yes sir. I just put directly in rock wool but if the cuts starts to droop I just put it in a cup of water. Within minutes it perks back up and after a few days I can put it back in rw without droopy anymore. Ive left cuts in a cup of water and they always bust roots, just gotta swap water every couple of days.

I stopped using cloning gels, trays etc, I only use a heating pad for winter.
 

NoWaistedSpace

PICK YOUR OWN
Once I ditch AN I think I should have the extra funds to do something like that if the RO system doesn't get me close to 0. I'm tired of waiting for my roommate to hook it up so this weekend I'm hoping a few of youse will be available if I need some assistance since I still have to read the instructions lmao
Don't we all. Hell, I might not understand, but maybe I'll get something or it will confuse me more. You young folks and this "new age" tech. lol
 

Coffeeholic

Really Active Member
Once I ditch AN I think I should have the extra funds to do something like that if the RO system doesn't get me close to 0. I'm tired of waiting for my roommate to hook it up so this weekend I'm hoping a few of youse will be available if I need some assistance since I still have to read the instructions lmao
Bring it on. Most go together quite easy. But just in case I'll have one prerolled. 😆
 

yougrowyourway

illgrowmyway

TerpyTyrone

LED Recruiter
🤣🤣🤣

View attachment 11877
No motherfucking clue lol. Roommate bought it, will have to ask.

My fuckin man! That's love bro!
As long as u have the saddle adapter that attaches the drain to the RO system. And a 120v outlet nearby. Its easy peasy. There are plenty of diagrams and videos too.
I did it and im no plumber!
Just didn't think about where the waste water from the system would go and how to power it
 

spyralout

🌱🌿🌲🔥💨
🤣🤣🤣

View attachment 11877
No motherfucking clue lol. Roommate bought it, will have to ask.

My fuckin man! That's love bro!
Nice! That looks like a 5 stage, probably 100-150 GPD. Depending on your water pressure you may need a booster pump. A cheap inline gauge helps but not necessary. The colder the water that goes in the longer it takes to produce clean water.
 

yougrowyourway

illgrowmyway
As long as u have the saddle adapter that attaches the drain to the RO system. And a 120v outlet nearby. Its easy peasy. There are plenty of diagrams and videos too.
I did it and im no plumber!
Just didn't think about where the waste water from the system would go and how to power it
I have it all...youse are making me feel better about this. Just need to actually sit down and watch a bunch of videos and read about it.
 

NoWaistedSpace

PICK YOUR OWN
🤣🤣🤣

View attachment 11877
No motherfucking clue lol. Roommate bought it, will have to ask.

My fuckin man! That's love bro!
Damn! I just go out in the driveway and pick up a bucket full of sand and gravel and run water through that.
Grandma told me when I was a kid, if water runs over 3 rocks, it's clean. If it runs over 3 rocks and a turd, it's dirty. lol
 
Last edited:
Top