#Heisenbeans Genetics

Boybelue

Super Active Member
I like the strips better than the cobs that I run. More efficient
Yep, and they are sooooo easy to build. A 5th grader could do it. Honestly to me, the most aggravating part was putting the thermal tape on without getting air pockets/bubbles trapped. All your doing is cutting some aluminum angle, drilling some holes, and doing some lightweight wiring. And if your worried about wiring schematics, LED gardener has it all laid out in lamens terms from 2x2 to 5x5. Just do it if anyone is thinking about it. It really is easy.
 
Last edited:

NoWaistedSpace

PICK YOUR OWN
I am really liking this Gmoozy, except one thing. The smell. If I were worried about smell this plant would be amazing, because it has zero smell at all. Like, it don't even have a plant smell to it lol. It truly is stealth weed. Hey, ya can't win em all, cuz normally I like the stinky shit. But I'll give her a try😁

View attachment 18357View attachment 18358
I got the "stinky shit" coming out of my old strains I have going. Smells like someone ran over a skunk in my living room. lol
 

NoWaistedSpace

PICK YOUR OWN
Yep, and they are sooooo easy to build. A 5th grader could do it. Honestly to me, the most aggravating part was putting the thermal tape on without getting air pockets/bubbles trapped. All your doing is cutting some aluminum angle, drilling some holes, and doing some lightweight wiring. And if your worried about wiring schematics, LED gardener has it all laid out in lamens terms from 2x2 to 5x5. Just do it if anyone is thinking about it. It really is easy.
Start pressing at one end and work back and forth toward the opposite end and you won't have air pockets in the thermal tape. Like putting graphics on motorcycle plastic.
 

Boybelue

Super Active Member
Start pressing at one end and work back and forth toward the opposite end and you won't have air pockets in the thermal tape. Like putting graphics on motorcycle plastic.
I started using a credit card for a straight edge, but its difficult because the tape dont need to make contact with the strip until your pressing with the card. Hard to explain what I'm talking about. You cant lay the tape down then go back and chase the air pockets out later with the card. Once those air pockets are in there they dont want to come out. I even sliced through the bubble/air pocket with a razor blade thinking the air would come out and it would lay on down but nope. With the bridgelux strips I dont think it's as important as some of the others that have more diodes crammed on like those double row f series/h influx. My aluminum angle feels like a hot cup of coffee, can lay my hand on it all day, comfortably. Just amazed me how cool they run.
 

NoWaistedSpace

PICK YOUR OWN
I started using a credit card for a straight edge, but its difficult because the tape dont need to make contact with the strip until your pressing with the card. Hard to explain what I'm talking about. You cant lay the tape down then go back and chase the air pockets out later with the card. Once those air pockets are in there they dont want to come out. I even sliced through the bubble/air pocket with a razor blade thinking the air would come out and it would lay on down but nope. With the bridgelux strips I dont think it's as important as some of the others that have more diodes crammed on like those double row f series/h influx. My aluminum angle feels like a hot cup of coffee, can lay my hand on it all day, comfortably. Just amazed me how cool they run.
You have to roll the tape on, starting at one end.
 

Gweedo

PICK YOUR OWN
And not to be captain obvious, but like with a screen protector on a phone any dust or crap like that can cause bubbles as well, good rub with alcohol and then a piece of tack cloth to get any fresh landers, i ocd out on tiny shit like this all the time lol and id never assume you guys arent cleaning your sinks lol 🤓🤓
 
Top