Gardening With Evergreen.

Evergreengardener

Evergreengardener

Agronomist,
Amos Otis said:
Is this your first time round with sundae driver? Your impressions? I've picked up some various sundae crosses to possibly play with.
Click to expand...
This is the first run with the sundae for me but so far I like what I see. I didn’t too or train it just let it go and it’s growing nice size super dense mugs covered in trichs. The frost came on early and it stretched maybe 30 percent its original size. I don’t really have a scent profile on it yet, I haven’t really had it out much and the tent is a mass mix up it just smells good in there lol
 
Evergreengardener

Evergreengardener

Agronomist,
I still don’t have assurance that my cs is going to work butt I’m optimistic so I’m making another jar of cs. I went and grabbed some alligator clips to add to my wires this time. Hooking the wire straight to the silver worked fine but it made cleaning the silver a pain in the ass and take longer than needed. Now I can pick the lid unclip the coin half’s and wipe them down

edit: I think this batch came out better I made it with a lower volt and a much longer time this batch is much less amber than the last almost clear actually 718064D4-2EA3-481D-8971-AA480B1264E4.jpeg
 
Last edited:
Amos Otis

Amos Otis

Brisco's Bargain Beans
Evergreengardener

Evergreengardener

Agronomist,
Amos Otis said:
I really like the looks of this one. I've got sundae banana cookies and 'rado's sundae sherbet in progress with clones taken should they turn out swell. This is encouraging. 🥳



Nice. Props to you and Eso.
Click to expand...
Thanks man. I’m really digging that plant and it has the most dense nugs I’ve ever seen you can’t squeeze them! Unfortunately I didn’t take clones of these I was looking for a quick head stash so I flipped these early. Luckily I grabbed two packs of those.

and the dynoberry is a great plant also I have 3 of them flowering now.
 
thenotsoesoteric

thenotsoesoteric

Shinobi of seeds
Evergreengardener said:
I still don’t have assurance that my cs is going to work butt I’m optimistic so I’m making another jar of cs. I went and grabbed some alligator clips to add to my wires this time. Hooking the wire straight to the silver worked fine but it made cleaning the silver a pain in the ass and take longer than needed. Now I can pick the lid unclip the coin half’s and wipe them down

edit: I think this batch came out better I made it with a lower volt and a much longer time this batch is much less amber than the last almost clear actually View attachment 28118
Click to expand...
My 1st batch I made with 4.5v, took 4 days to get to 23 ppms and was pretty clear. Worked just fine to reverse g sato.

2nd batch I made with 12v and it was much faster but amber colored. Worked for lvtk. Still got a jar left but no need for it before it will go bad.
 
curious2garden

curious2garden

Really Active Member
Evergreengardener said:
I still don’t have assurance that my cs is going to work butt I’m optimistic so I’m making another jar of cs. I went and grabbed some alligator clips to add to my wires this time. Hooking the wire straight to the silver worked fine but it made cleaning the silver a pain in the ass and take longer than needed. Now I can pick the lid unclip the coin half’s and wipe them down

edit: I think this batch came out better I made it with a lower volt and a much longer time this batch is much less amber than the last almost clear actually View attachment 28118
Click to expand...
I never had much luck with CS. I use STS. Here is CN's treatise on making it, easy peasy.

cannabineer said:
If you are serious about reversing female Cannabis, you need to abandon the "colloidal silver" scam.

You need chelated ionic silver. The pros use STS, silver thiosulfate solution.

Here's the recipe. You can buy the two necessary reagents on Amazon. Three, if you have difficulty sourcing real distilled water.

Step 1 is to make two stock solutions.

Part A: weigh out 2.00 grams of silver nitrate (ACS reagent is preferred, but anything north of 99% purity is ok. USP is good too.) and dilute with DISTILLED water to a final volume of 500 ml.

Part B: weigh out 11.90 grams sodium thiosulfate pentahydrate (ACS or USP grades) and dissolve in distilled water; adjust to 500 ml.

The working solution is 1 part A, 1 part B and 8 parts distilled water. Store cool and DARK. Spray this on the girls you wish to reverse. It might take repeat applications. The stock solutions keep indefinitely, and the ready working solution should be good for months if you store it well.

But 20 ppm is 180 micromolar, assuming all 20 ppm are silver ion (f.w. 108.9 g/mol), which is a bad assumption. 50 micromolar is more likely. (And silver ion is the actual active principle in "colloidal" silver solutions. The purveyors of chemical woo like to conceal that fact, alongside the fact that electrochemically-generated silver solutions are a: unstable and b: of wildly variable initial Ag+ titer.) The solution I'm describing for you is about 2.5 millimolar in silver ion (so maybe 50 times as concentrated as your wire tea), and since one is using soluble ionic feedstocks, it'll be the same molar strength each time, every time.
Click to expand...
 
You must log in or register to reply here.
Top