Did you clone her? I had no problem getting roots in less than 7 day.
Yeah really vigorous! I got the cut a while ago, I cloned from the established mom.Did you clone her? I had no problem getting roots in less than 7 day.
Looks great man.
Thank you, should be even better next time!Looks great man.
Yeah, the sundae driver is great I'll know what the grape ape is like soon I just cut it down.All these pictures are making me feel good about those MF cuts. You’re doing an outstanding job on them.
That thing is gonna be badass! How many watts per COB, and is that a 315w CMH?
Up to 56w per cob (560w total), the cmh is 500w.That thing is gonna be badass! How many watts per COB, and is that a 315w CMH?
Interesting, 500 watt. Usually 315/630, must be something new or rare? Anxious to see that thing fired up!Up to 56w per cob (560w total), the cmh is 500w.
New maybe? I won it.Interesting, 500 watt. Usually 315/630, must be something new or rare? Anxious to see that thing fired up!
Don’t know, I might have to move some heat sinks. Worst case I have to drill 16 holes. I switched this tent filter to blow through as well.The cmh doesn't heat the cobs up? That grape ape looks absolutely delicious!
is it resting above the cob heatsinks? That's how it looks in the pic. Airflow should be the key to no problems. Gonna get a cmh and put it on the floor of my one tent and the other tent I'll add uv ir led supplements then run the same cut in both see the difference for myself. Quite curious.Don’t know, I might have to move some heat sinks. Worst case I have to drill 16 holes. I switched this tent filter to blow through as well.
Shining upwards?Gonna get a cmh and put it on the floor of my one tent
It's not touching. I'm more worried about the wire for the cobs getting too hot but when I built these I used a special wire called tefzel, which has an operating temp of up to 150C (about 300f), is very abrasion and cut resistant. Basically the perfect wire for a bare fixture that doesn't get moved much like mine.is it resting above the cob heatsinks? That's how it looks in the pic. Airflow should be the key to no problems. Gonna get a cmh and put it on the floor of my one tent and the other tent I'll add uv ir led supplements then run the same cut in both see the difference for myself. Quite curious.
I had to check that out. That is the first time i have seen that 500w cmh. That light is going to be killer. Hopefully you will not have a heat issue. As i have stated before you should get some of those photo's in the POTM several i see that could easily win. That light you built is like the big brother to the one i built the 515 sport.New maybe? I won it.
Growers Choice
Growers Choice have the world's most completed grow lamp selection. 600W, 1000W Double Ended grow lamps from 2K HPS,4K Daylight, 6K Blue to 10K finisher.www.growersc.com