#Heisenbeans Genetics

spyralout

🌱🌿🌲🔥💨
Its either an excess of something or lack of. I would flush at 5.9 and maybe add an inoculant or use a tea or something similar to eliminate root issues. Maybe add some hydroguard to the mix and go through a wet dry cycle and than start with a fresh batch of nutes.
I've been using supernatural lately and I'm in love with the shit
Are you using liquid or dry? What do you like about it more than GH?
 

Heisen

Dont Need One
Admin
You might have called it. As I was flushing last night I noticed the Bluelab said the res was 84. Same Blumats but new to Jacks and DTW. I ran LOS before and plain water just did its thing. I may need to chill the water and flush occasionally. Its a learning curve, right?
Prob a pathogen from the warm water trickling some uglies into your system. Add a tea into your setup and put an end to that bullshit. No need to chill DTW or ebb systems IMO. Especially since your ambient air temp is what keeps your pot root zone above 80. Correct the problem before it gets to the roots and it will straighten up.
 

Heisen

Dont Need One
Admin
Are you using liquid or dry? What do you like about it more than GH?
Its Dry, Its a 1 part mix and i just add the powder till i hit 500 PPM in Veg , 800 Flower , 1000 late flower, and feed the plants. Running all these clones and so many plants i dont have time for fuck ups or mistakes and the time is more valuable. I need a good 1 part that i can just hit and go. The veg is 20-20-20 which is awesome IMO and it takes a little to go a long ways. The flower ratio is perfect for flower. No need for boosters. My plants are loving this shit.
 

spyralout

🌱🌿🌲🔥💨
Its Dry, Its a 1 part mix and i just add the powder till i hit 500 PPM in Veg , 800 Flower , 1000 late flower, and feed the plants. Running all these clones and so many plants i dont have time for fuck ups or mistakes and the time is more valuable. I need a good 1 part that i can just hit and go. The veg is 20-20-20 which is awesome IMO and it takes a little to go a long ways. The flower ratio is perfect for flower. No need for boosters. My plants are loving this shit.
Thanks for the insight. I've been interested in changing it up with dry. Looks like it's between this and megacrop.
 

DET—PDX

Insanely Active Member
Gonna do some reading into these strains! Love all the gorilla glue crosses, really wanting to get my hands on some seeds for the next grow I start in August. Which strain do you feel is the heaviest yielder on your site? Which do you feel is the most potent THC wise, and have any been lab tested yet? I would love a sample but otherwise I might just buy them now.
 

SCJedi

Synergist
Prob a pathogen from the warm water trickling some uglies into your system. Add a tea into your setup and put an end to that bullshit. No need to chill DTW or ebb systems IMO. Especially since your ambient air temp is what keeps your pot root zone above 80. Correct the problem before it gets to the roots and it will straighten up.
I'm trying man. I live in Sacramento and the 40 days of 100 degree days has begun and my 10K BTU AC is on the blink and the res sits outside of the breeding tent. Maybe some kind of a cooling pad? My tent is typically around 80* though. I may add a smidge of H2O2 as good measure.
 

TerpyTyrone

LED Recruiter
Seems correct to me. Would you be running something differently?
Nope. Just wondering what the heat is like at 66%. I'm gonna research these and find a deal. Even v1 is good for me.
We had a whole upheaval about running 600 watts at full tilt and the heat produced vs. 600 watt @ say 66% will give ya less heat with the same amount of wattage. More distributed over more diodes. Less heat right!?
 

Dustjesus

Insanely Active Member
Nope. Just wondering what the heat is like at 66%. I'm gonna research these and find a deal. Even v1 is good for me.
We had a whole upheaval about running 600 watts at full tilt and the heat produced vs. 600 watt @ say 66% will give ya less heat with the same amount of wattage. More distributed over more diodes. Less heat right!?
Drivers are at 93f after 24 hours on. Canopy temp 78. The lack of heat continues to blow my mind.
 

TerpyTyrone

LED Recruiter
Drivers are at 93f after 24 hours on. Canopy temp 78. The lack of heat continues to blow my mind.
My next run is 12 12 from the go with 8 qb132's I am sure the frost will be excelent on our shit!
My goal in changing over to led was to minimize my power usage by not using AC to cool an hps in August.
I just checked my power bill. Last August I was 4 times what my neighbors were.
The electric companies know whats up!
Pay the bills everybody!!
 

Bodyne

PICK YOUR OWN
For the love of Gawd, lol, most def recommend topping the skeleton cookies and maybe don't flower from seed.:p🌊Topped one, cool, didn't top one, gonna be stretchier than the heisenghost, lmfao. Tried a lil nug of the heisenghost, made me realize I need some of Heisen's GG4 S1's. All GG with a lil sour.
 

Greenthumbskunk

PICK YOUR OWN
Any of your hydro pros think that you know what this is? I mix Jacks 5-12-26, CalNit 15-0-0, and Epsom at 75g, 50g, 25g in 25 gallons of water. Blumats, DTW in pure coco. It went from stupidly healthy to this in less than a week. Hot nutes? I flushed with 50% nute solution and a few ml of CalMag last nightView attachment 9971

Purple stems? Need calmag

Also looks like another def going on as well. Prob need to run a booster
 

Greenthumbskunk

PICK YOUR OWN
Any of your hydro pros think that you know what this is? I mix Jacks 5-12-26, CalNit 15-0-0, and Epsom at 75g, 50g, 25g in 25 gallons of water. Blumats, DTW in pure coco. It went from stupidly healthy to this in less than a week. Hot nutes? I flushed with 50% nute solution and a few ml of CalMag last nightView attachment 9971

I've grown in Jacks in hydro and never had a Phosphorus problem. Usually it was root damage or PH out of whack.

Are you in bloom or veg?

But are your stems purple? And is it common with your strain?
 
Top